SECOND-HAND MACHINE
Year of construction 1996
TYPE 300 Ring Binder Assembly Line
with computer assisted change-over
technology for different ring binder formats
with integrated program memory for formats from A5 to A4
as well as all special formats
Consisting of the following modules:
- Creasing machine with frequency controlled and
chopped three-phase AC motor of the creasing tools,
with integrated suction type feeder,
creasing is done in 2 separately adjustable stations,
release by electronic proximity switches,
with computer controlled adjustment of the spine width of the cover,
creasing distance: 20 - 90 mm
creasing width: 6 - 12 mm
thickness of cover: 1 - 3,5 mm
- Insertion machine for fingerhole eyelets,
Punching of the hole and inserting of the eyelet with separate tools,
automatic feeding of the eyelets via a vibrating feeding device,
adapted to our fingerhole eyelets no. 281,
with hole and eyeleting tool,
with frequency controlled brake motor, whereby the machine can be switched on and off.
Position of the fingerhole eyelet: adjustable in the range from 150 mm, according to request by customer
- Twin head riveting machine for fixing ring metals,
with computer assisted adjustment of format and metal sizes,
10 servo axes,
programming direct at the machine by means of control screen,
with integrated program memory (approx. 150 different ring binder formats can be stored in the program memory and retrieved later), change-over time depending on format 2 – 4 min.
with frequency controlled and chopped three-phase AC motor drive,
machine control by General Electric,
adapted to one size of rivets with 4 mm shaft diameter, 6 – 8 mm head diameter,
infeed of rivets via a vibrating feeding device,
manual infeed of metals (ring metals by magnet lever from package),
with automatic separation and infeed by pusher pawls, pneumatic-mechanical,
control station for covers, metals and rivets,
fully automatic machine stop once a metal could not be fixed to the cover
and final control of ring binders
Format size: height of covers 160 - 350 mm
width of covers 320 - 650 mm
Thickness of cover: min. 1 mm, max. 3,5 mm
Rivet center distance: 90 - 300 mm
Voltage: 3ph. 400 Volt, 50 c.
Output: max. 20 - 50 cycles / min.
- 3. Rivet station, complete with drive, total length approx. 800 mm,
Adapted to one size of rivets with 4 mm shaft diameter, 6 – 8 mm head diameter
- Folding station for the assembled ring binders,
with conveyor belt
Picture shows similar execution!
Price on request info@hang.de
Reconditioned second-hand machine
As good as new
Year or construction 2003
TYPE 400 Ring Binder Assembly Machine
Consisting of the following modules:
- Automatic twin head riveting machine
with brake motor drive,
automatic infeed of covers from stack magazine,
automatic transport by pusher pawls,
with frequency converter for varying the transport speed of the covers
adapted to one size of rivets with 4 mm shaftØ, 6 – 8 mm headØ,
infeed of rivets via rotating sorting bowls
adjustment of center distance via hand wheel with digital display
format sizes and feed of mechanical device adjustable
by means of handwheels and scales
control station for rivets and metals
- format sizes: height of covers: 160 - 350 mm
width of covers: 320 - 840 mm – with metal in backside of the cover max. 880 mm
- material thickness: min. 1 mm
max. 3,5 mm
- center distance: 90 - 300 mm
- voltage: 3ph, 400V, 50 Hz.
- power required: 1,8 kW
- change-over time: approx. 15 - 20 min.
- output: max. 40 cycles / min. (depending on material)
- Creasing unit, inline model
Creasing tools are driven via frequency-regulated brake motor,
the creasing is done in one station via moving the covers
by means of a pneumatic cylinder,
adjusment of creasing width via scale and fixed gauge
- distance between creasing lines: 0 – 90 mm
- width of creasing lines: 6 – 12 mm
- material thickness: 1 – 3,5 mm
- voltage: 3ph, 400V, 50 Hz.
- output: max. 30 – 35 cycles / min.
- Folding station for the finished ring binders, with conveyor belt
Picture shows similar execution!
Price on request info@hang.de