Triple riveting machine
Model 150-25/26
- For small to medium series/batches
- Suitable for: Cardboard, paperboard etc.
- Areas of application: Ring binders, lever arch files etc.
- Rivet feed via motor-driven rotating sorting container
- Rivet gun
- Rivet stroke 55 mm
- Standard configuration for working with hollow rivets with a 4 mm shaft diameter, length up to 19 mm, head diameter 6 - 8 mm or 8 - 10 mm
- Braking motor
- Cycle time 0.5 sec.
- Rivet pitch adjustable with handwheel:
- Left riveting head to centre riveting head offset min. 100 mm
- Right riveting head to centre riveting head offset min. 75 mm
- Left riveting head to right riveting head offset max. 440 mm
- Left and centre riveting heads can be disengaged by means of a sliding coupling
| Model | 150-25 | 105-26 |
|---|---|---|
| Rivet feed via electromagnetic sorting unit | optional | optional |
| Level monitoring in the rivet feeds in conjunction with container drive motors | optional | optional |
| Rivet monitoring in the rivet gun | optional | optional |
| Rivet feed hard chrome-plated for painted rivets | optional | optional |
| Adjustable rivet pitch with handwheel and digital position indicator | optional | optional |
| Feed table | ||
| Rear and side stops adjustable | ||
| 3-point triggering through microswitches as well as electrical footswitch | ||
| Working depth 310 mm | ||
| 3-point triggering through microswitches as well as electrical footswitch Working depth 540 mm |
||
| Working depth without 3-point triggering 600 mm | ||
| 2-handed triggering | optional | optional |
| Lever mechanism tool, manually pivoting, fixed rivet pattern, triggering via electrical footswitch | optional | optional |
| Electrical part counter | ||
| Working height 1,080 mm | ||
| Special riveting anvil for customer-specific applications | optional | optional |
| Special voltage | optional | optional |
Standard configuration