Back to Single-riveting machines
162-01 – Riveting machine with a large working depth of 620 mm
Suitable for processing hollow rivets, tubular rivets, semi-hollow rivets and double hollow rivets (feeding of the rivet cap). Riveting machine for medium to large production runs/batches
Benefits
- Working depth 620 mm
- Robust welded construction
- Riveting force 10 kN
- Rivet feed via a motor-driven, rotating sorting hopper
- Changing the type of rivet requires just a few simple steps thanks to quick-change elements
- Riveting pliers
- Riveting pressure can be adjusted by changing the height of the lower punch
- For pre-punched workpieces, positioning is achieved via the spring-loaded rivet pin of the lower die
- For workpieces that are not pre-punched, using stops or a targeting device
- Drive with brake motor
Request a quote
Advice: +49 7161 6005-0
- Application of a pre-pressing force to the components via a rivet setter
- Process monitoring – force-displacement measurement with display and evaluation unit
- Rivet force limitation to compensate for thickness tolerances in workpieces (pressure compensation via disc springs)
- Level control in the rivet feed system for fill level monitoring
- Rivet feeder with electromagnetic sorting device
| Feature | 162-01 |
|---|---|
| Working depth (reach) | 620 mm |
| Riveting cycle | 0,5 Sec |
| Special clamping | optional |
| Electric piece counter | Yes |
| Pressure equalisation | optional |
| Process monitoring | optional |
| Activated via an electric foot switch; protective guard at the front | Yes |
| Operated via a foot pedal with a sighting device | optional |
| Operated via a two-hand control | optional |
| Level control in the rivet feed mechanism | optional |
| Rivet feed via electromagnetic sorting devices | optional |
| Riveting stroke | 55 mm |
| Riveting stroke 55 mm | optional |
| Flat arm, reinforced | Yes |
| Rivet anvil variants for customised applications | optional |
| Working height | 1100 mm |
| Working height optional | 850 or 1300 mm |
| Special version for integration into a production line | optional |
| Special version for customised applications | optional |
| Rivet shank diameter (after testing) | 2-4 mm |
| Riveting force | 10 kN |
| Cycle time | 0,7 Sec |
| Drive power | 0,37 kW |
| Rivet stroke increased | optional |
| Working depth | 50 mm |
