Back to Single-riveting machines
162-22 / 162-21 / 162-01 – Rivet machine 162-22 with a wide range of applications
With the additional models 162-01 and 162-21
Suitable for processing semi-hollow rivets, solid rivets, hollow rivets, tubular rivets, double-point rivets and double-hollow rivets (feeding of the rivet cap); riveting machine for medium to large production runs
Benefits
- Reinforced design, robust welded construction
- Rivet feeder with motorised, rotating sorting hoppers
- Changing the type of rivet requires just a few simple steps thanks to quick-change elements
- Riveting pliers
- Riveting pressure can be adjusted by changing the height of the lower punch
- For pre-punched workpieces, positioning is achieved via the spring-loaded rivet pin of the lower die
- For workpieces that are not pre-punched, using stops or a targeting device
- Drive with brake motor
- Riveting force 16 or, optionally, 22 kN; for higher riveting forces up to a maximum of 40 kN, we recommend our model 162-21
- Working depth 350 mm; the 162-01 model is suitable for overhangs of up to 620 mm
- Activation is available either with a forward-mounted finger guard and an electric foot switch, or alternatively with a sighting device and foot lever, or via a two-hand control system
Request a quote
Advice: +49 7161 6005-0
- Application of a pre-pressing force to the components via a rivet setter
- Process monitoring – force-displacement measurement with display and evaluation unit
- Rivet force limitation to compensate for thickness tolerances in workpieces (pressure compensation via disc springs)
- Level control in the rivet feed system for fill level monitoring
- Rivet feeder with electromagnetic sorting device
| Feature | 162-22 | 162-21 | 162-01 |
|---|---|---|---|
| Working depth (reach) | 350 mm | 350 mm | 620 mm |
| Cycle time | 0,5 Sec | 0,7 Sec | 0,7 Sec |
| Special clamping | optional | optional | optional |
| Electric piece counter | Yes | Yes | Yes |
| Pressure equalisation | optional | optional | optional |
| Process monitoring | optional | optional | optional |
| Activated via an electric foot switch; protective guard at the front | Yes | Yes | Yes |
| Operated via a foot pedal with a sighting device | optional | optional | optional |
| Operated via a two-hand control | optional | optional | optional |
| Level control in the rivet feed mechanism | optional | optional | optional |
| Rivet feed via electromagnetic sorting devices | optional | optional | optional |
| Riveting stroke | 55 mm | 100 mm | 55 mm |
| Rivet stroke increased | optional | optional | optional |
| Flat arm, reinforced | Yes | Yes | Yes |
| Rivet anvil variants for customised applications | optional | optional | optional |
| Working height | 1100 mm | 1100 mm | 1100 mm |
| Working height optional | 850 or 1300 mm | 850 or 1300 mm | 850 or 1300 mm |
| Special version for integration into a production line | optional | optional | optional |
| Special version for customised applications | optional | optional | optional |
| Working depth | 50 mm | 50 mm | 50 mm |
| Rivet shank diameter (after testing) | 2-5 mm | 3-8 mm | 2-4 mm |
| Riveting force | 16 or 22 kN | max. 40 kN | 10 kN |
| Drive power | 0.37 (Option 1.1) kW | 3 kW | 0,37 kW |
| Riveting cycle | 1,1 Sec | 0,5 Sec | |
| Collecting device for finished riveted parts | optional | ||
| Riveting stroke 55 mm | optional |
